No people, animals or objects must be within the workspace when the robot is operating in manual or automatic mode.
The tablet must always be turned on when the robot is operating in automatic mode.
The robot must always be supervised when operating.
Incorrect operation and misuse of the robot can create dangerous situations.
Turn off the robot, using the battery key, before maintenance or component replacement.
Ensure that no hoses hang loose, as they could damage the robot and its environment.
TinyLineMarker Tablet: The cap covering the micro-USB connector must be closed correctly to guarantee water resistance.
Cleaning and Repairs
Do not use high-pressure cleaning devices on the robot, as this will damage the robot.
Remember to always conduct the cleaning procedure when a marking job is finished. Failure to clean correctly after use will result in faulty spraying and can cause defects that will not be covered by warranty.
Do not use corrosive or dissolving liquids to clean the hose system, as they will damage the pump and hoses.
Be careful not to pull or squeeze any cables and hoses while attaching or detaching the spray tool.
TinyLineMarker Pro X: Do not put any load on the GPS antenna (e.g. when tilting the robot), as it could damage the GPS antenna.
Do not use any spare parts that have not been approved by TinyMobileRobots.
Only use field marking paint.
The robot must be stored at a temperature of minimum 5 degrees Celsius / 41 degrees Fahrenheit.
Traffic Regulations
Always follow the local traffic regulations in your region when using the robot.
Battery
Only charge the battery with the supplied charger. The charger must be connected to 100-240 VAC, 50-60 Hz.
The battery must not be charged while it is connected to the robot.
The battery must only be charged indoors at normal room temperature, and it should always be supervised while recharging.
Do not charge the battery unattended or overnight.
Do not charge batteries that have been exposed to blows or other forms of external damage. There is a risk that the battery could explode if this safety measure is not respected.
The battery must always be fully charged when stored. The battery must be recharged every three months if stored for a longer period.
Always use chargers, cables and batteries approved by TinyMobileRobots when charging the robot battery and tablet. Unapproved chargers may cause the battery to explode or damage the devices.
Disposal
The robot consists of a robot, a removable battery, and a tablet. Recycle all product parts according to the laws applicable in your region.
Detach the removable robot battery and recycle it separately according to the laws applicable in your region.
The robot contains electronic components. Recycle them according to the applicable laws in your region.
The tablet contains electronic components and a removable battery. Recycle them according to the laws applicable in your region.
The owner is responsible for recycling the product correctly. Proper recycling will ensure that negative impact on the environment is minimized. Incorrect recycling may have negative environmental impact.