The TinyLineMarker robots have two operation modes:
Manual mode
The robot will always start in manual mode when it is first turned on. In manual mode, the user can manually drive the robot using the tablet joystick and initiate functions such as "Cleaning", "Prime pump", "Test spray", "Measure" and "New field".
Automatic mode
The robot switches to automatic mode when it is programmed to do an action autonomously (e.g., using the Drive to, Test field and Start functions in the TinyLineMarker app). You can stop the robot at any time in automatic mode by using either the TinyLineMarker app or the STOP button placed on top of the robot.
Mode | Status light | Control |
Automatic mode | Flashing | Only STOP buttons (on robot and in the app) are available |
Manual mode | Constant |
Robot can be navigated using the joystick in the TinyLineMarker app (or stopped with the STOP button on the robot) |
WARNING
No people, animals or objects must be within the workspace when the robot is operating in manual or automatic mode.